USB RFID Reader – 13.56MHz

Description

A USB RFID card reader operating at 13.56MHz is a device that can read RFID cards and communicate with a computer or other compatible devices via a USB interface. This type of reader is commonly used for access control, attendance tracking, and other applications where RFID card authentication is required.

To use a USB RFID card reader, you typically follow these steps:

1. Connect the Reader: Plug the USB connector of the RFID card reader into an available USB port on your computer or device.

2. Install Drivers (if necessary): In some cases, you may need to install specific drivers for the RFID card reader to work properly. These drivers are usually provided by the manufacturer and can be downloaded from their website. Follow the installation instructions provided with the driver package.

3. Power On the Reader: Depending on the reader model, it may be powered directly from the USB connection or require a separate power source. Ensure the reader is powered on and ready to use.

4. Position the RFID Card: Hold or place the RFID card near the reader’s antenna or designated reading area. The reader will detect the card and read its data.

5. Data Output: The RFID card reader will transmit the card’s information to the connected computer or device through the USB interface. The data can be processed by software applications that support RFID card reader integration.

Note: The exact usage and functionality of a USB RFID card reader may vary depending on the specific model and manufacturer. It’s important to consult the reader’s user manual or documentation for detailed instructions and any specific requirements.